RussellMc wrote:
> Unlikely but -
> Anyone willing and able to deliver the following to me by 8pm tonight.

Yes, very unlikely.

> Price should be low :-).

Even less likely.

> Logging accelerometer, 3 axis.
> 5g max per axis.
> Maintain RTC. Linear counter OK.
> If g on any axis exceeds 1.2 g OR if  g in any direction other than
> the highest one (not axis), orthogonal to the highest  direction
> exceeds 0.2g then
> Log peak g in each ?0.1? second time slot for 10 seconds, plus time.
>
> Modify spec to be useful.
> Logging time =3D 20 days.
>
> AIM:  Measure g forces experienced by baggage - especially during
> airport lugage handling.

I do have some boards that have a battery holder, PIC, and three axis
accellerometer on them.  This wouldn't be that hard, but not in a few hours
(probably already too late now when I'm reading this).

The board was designed to control the servos of four flight control surface=
s
of a flying wing.  It is therefore battery powered, has a 3 axis
accellerometer and 2 axis gyro, and PWM outputs to the servos.  It doesn't
have much EEPROM, but it shouldn't be hard to add that on via SPI or IIC as
a one-off.


********************************************************************
Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
(978) 742-9014.  Gold level PIC consultants since 2000.
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.