On Fri, Sep 24, 2010 at 2:14 PM, RussellMc <apptechnz@gmail.com> wrote:

> Keyboards opened this way may never ever again quite look like Apple
> intended them :-).
>

I am quite sure there is a joint somewhere on the bottom -- same as with
MacBook Pro... Except as it is pointed out earlier it may have glued instea=
d
of using screws or other methods. But then if you dremel in there it should
do the trick and even if it does not look like the same as it was it is on
the bottom anyway.

Tamas




>
> These disks are by far the most frequently used tool on my Dremel.
> Attempt to bend them a smidgen (especially at speed) and they
> dematerialise and reenter real space at many random adjoining
> locations. Place tool on bench and leave a while and you will break
> the disk. When cutting metals and abrasive materials the disks wear
> quite quickly. Apart from these minor annoyances they are a superbly
> useful tool. Happy with hardened steels, bolts, PCB, fingers (bone and
> all I'm sure) and more.
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



--=20
int main() { char *a,*s,*q; printf(s=3D"int main() { char *a,*s,*q;
printf(s=3D%s%s%s, q=3D%s%s%s%s,s,q,q,a=3D%s%s%s%s,q,q,q,a,a,q); }",
q=3D"\"",s,q,q,a=3D"\\",q,q,q,a,a,q); }
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.