-

   3 Phase full controlled IGBT based Bridge to supply variable Frequency
   and variable voltage.
   -

   1200v / 25 Amps AC =96 DC Converter Bridge power modules.
   -

   *Rating* *: *Suitable 3 HP AC Motor or 5 HP @ 60 % load.
   -

   *Input : *440 V 3 Phase AC Mains
   -

   *Output : *3 phase variable Frequency (10 - 60 Hz) and 3 phase voltage
   variable from (45 =96 440 V).
   -

   *Trigger Circuit :*PWM based 6 quadrant Trigger circuit for Triggering
   IGBTs to generate 3 Phase variable frequency O/P
   -

   *Metering: *Voltmeter and Ammeter with Selector switch for input AC
   supply.
   -

   -

   *Test Points : *Necessary test points to measure the I/P voltage,
   Triggering pulse of IGBTs. Test points for measurement and study provide=
d on
   the front plate.
   -

   *Protection*: Fuse and Overload Protection , Over Current ,Under Voltage=
,
   over Voltage protection .Field failure protection is in built , Hall eff=
ect
   sensor isolation for DC link , PWM signal isolation using opto coupler*.=
*
   -

   *Feed back and Control: *Built in voltage* *feed back to maintain
   constant speed against variable load. Speed setting via front panel
   Potentiometer.
   -

   *DSP Kit *to generate the necessary signal for speed control of AC 3
   phase induction motor
   -

   Interface card from the DSP Kit to the Inverter Control is in built in
   the system. Connection via 14 pin DIP connector.
   -

   Necessary Program for the DSP kit will be provided along with the
   trainer.

Does any body know any readymade development board which can meet current
and power requirement
of such a given specification.?

I have googled to reach PICDEM MC PIC18F4431 ..any one with any previous
experience working with it ...
Any suggestion in this regard is most welcome



--=20
Thanks & Regards
Nidhi Mittal Hada
Scientific officer D
Computer Division
Bhabha Atomic Research Center
Mumbai

http://nidhi-searchingmyself.blogspot.com/
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.