I've mentioned Univelop several times . They offer=20 a 200 square inch panel for $59 plus $30 shipping to North=20 America. Quality has been good - good enough that I've switched most=20 of our production boards to them. That $89 gets you as many of your boards that will fit into a 200"=20 panel, with solder mask and silkscreen both sides. There does not=20 appear to be any limit on hole sizes or quantity. They will not allow you to put different boards into that panel, even=20 if you panelize it yourself. Bummer, actually. Turn time is variable - its been as quick as two weeks and as long as=20 a month (very rare), with three weeks being kind of the mean. dwayne At 02:42 PM 9/6/2010, Olin Lathrop wrote: >Philip Pemberton wrote: > > I'm going to start by asking: does anyone know of any reputable PCB > > manufacturers? > >I usually use Gold Phoenix for prototypes. $109 delivered to North Americ= a >for however many boards fit in 100 square inches, solder mask top and >bottom, silkscreen on top, and electrically tested. No limit on holes, an= d >specified hole size is the final hole size. Usually about 1 1/2 weeks fro= m >when I order over the web to when boards show up. --=20 Dwayne Reid Trinity Electronics Systems Ltd Edmonton, AB, CANADA (780) 489-3199 voice (780) 487-6397 fax www.trinity-electronics.com Custom Electronics Design and Manufacturing --=20 http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .