On Mon, 06 Sep 2010 19:19:28 +0100, you wrote:

>I'm going to start by asking: does anyone know of any reputable PCB=20
>manufacturers?
>
>I need a couple of prototype boards made up -- dual layer, 10/6 design=20
>rules (10mil track, 6mil gap), Eurocard size PCB (160x100mm). Thus far=20
>the quotes I've obtained are somewhere between 'nuts' (=A3178 for two=20
>boards) and 'utterly insane' (=A3412 for two boards), or there are strings=
=20
>attached (max 50 drilled holes per square decimeter, "drill hole in your=20
>aperture file is NOT the finished hole size" and so on). All I'm after=20
>is 1.6mm FR4, PTH, soldermask on both sides and maybe a component print=20
>on the top if it's not too expensive. And if I'm being absolutely=20
>honest, the soldermask is only really necessary on the top side; all the=20
>solder-side stuff is 0.1in pin headers and connectors.



Eurocircuits - www.eurocircuits.com - has a fairly cheap 5-day proto servic=
e. Not sure if you still
need to set up an account with them though. They run 3 boards & you get the=
 third free if it tests
OK.=20
110 Euro for 2 eurocards in 5 days with shipping

UK based - www.screenbond.co.uk unusually low tooling costs (typically =A34=
0) , can do down to 24hr if
you have deep pockets but pricing not bad for normal 5-10 day - typically s=
imilar to Eurocircuits

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.