>
> The load needs to draw 11.6A from 24Vac and have a 0.35 power
> factor. I have
> constructed some test loads to try, using contactors and such, but I don'=
t
> seem to have an inductive enough load. The contactors I have tried give a
> phase shift of around 58 to 61 degrees... I believe the 0.35PF implies a
> shift of 69.5 degrees.... so I'm not inductive enough.

Forgot to mention the frequency is 60Hz.



--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.