On 8/11/2010 11:45 AM, mcd@is-sixsigma.com wrote:
> I noticed that at
>
> http://github.com/jjmcd/Elmer160/tree/master/18tst
>
> I have a very simple C program that uses a PIC 18 and the Linux toolchain=
..
>   I probably used PIKlab but there is a Makefile in there instead of a
> project file.
>
> It includes an LCD library that interfaces with SDCC.
>
> The project was written for the PIC-EL, which probably isn't the project
> board you want, and with a re-think of the board the LCD output routine
> could be simplified.  (The PIC-EL was intended for 16F's and the pinout o=
f
> the 18 pin 18F's is different, so there are some gymnastics in the
> software that wouldn't be necessary if the board was intended for the
> 18F.)
>
> --McD
>
>

How does one download files from github?

If I right-click and save link, all I get is java script saved.  If I=20
click on the filename, it opens on screen.
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.