> Thickness (height above PCB) of display is not important.

> Currently I'm using 3 single-digit displays (LSHD-A103), but the
> pin-count is eating up PCB space

So, if no "proper" solution presents itself, you could consider
mounting the displays on a daughter board, combining whatever tracks
your drive scheme allows, and then connecting to main PCB with header
or pins or whatever.

Dimensionally, if the existing displays meet your size requirement and
if height above PCB is unconstrained, this gives you an ideal
solution. Suboptimal in other respects though.


        Russell
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.