I'll try to watch that, it is the original message, I just took a recent=20
message wich happened to be a reply, changed the subject, but forgot to=20
remove the "Re". :)

On 8/6/2010 12:02 PM, Bob Blick wrote:
> Backlight draws too much current?
>
> By the way, I could not track this message thread back to anything
> without "Re:" before it - but what I am replying to looks like the
> original message, not a reply.
>
> Cheerful regards,
>
> Bob
>
>
> On Fri, 06 Aug 2010 09:09:30 -0400, "Carl Denk" said:
>   =20
>> I am driving a 44780 LCD display 4 bit data mode with an 18F1320 with in
>> the common way, the 4 data signals are driven by RB4 - RB7. Using a
>> PICKIT2 to program and debug the board. RB7 and RB6 are dual function
>> also as PGC and PGD. I get an error when trying to program or debug with
>> this setup. The error goes away  if I unplug the display ribbon cable.
>>     =20
>   =20
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.