> A 4 degree tilt (hard to avoid by hand) will produce a "crater" which
> is 3.2mm diameter in 3mm thick material. The centre will nominally
> still be almost only 3mm (oval projection of drill is slightly larger)
> but in practice it works if "enough" angle is used. Real machinists
> and people with a full set of drills are now rising up in fury :-)..

Somehow I think solarwind will be better off using a 1/8" drill, which
is quite possibly more easily obtainable in a nearby hardware store than
a 3mm or 3.2mm.
--=20
Scanned by iCritical.

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.