Roger Weichert wrote:
> I can put in any of the copies I've made (in the programmer) and they sti=
ll=20
> verify as the same as my original data, and the checksums are still all t=
he=20
> same too  ...  yet the original is the only one that works in the circuit=
=20
> boards (I've tried a couple different boards)
>
> If the Dataman is crook, why does the data read off all the chips ok and =
the=20
> checksum ok  ...  yet not one of the 14 I've tried have worked in it's=20
> location.
>  =20
Roger,
Double check the speed rating on the new eproms.

If you send me the binary file, I can program and post you an eprom to try.
David...

--=20
___________________________________________
David Duffy        Audio Visual Devices P/L
Unit 8, 10 Hook St, Capalaba 4157 Australia
Ph: +61 7 38235717      Fax: +61 7 38234717
Our Web Site: www.audiovisualdevices.com.au
___________________________________________

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.