On Thu, Jul 29, 2010 at 1:55 PM, Joep Suijs <jsuijs@gmail.com> wrote:
> RA0 is also wired to the ICSP connector. I guess you have disconnected
> the programmer?
>

If I recall correctly, try setting an option in MPLAB to release MCLR
when it powers up the project.

I used that board recently.. the AN0 input is the same pin as MCLR..

Good Luck,
LyleHaze
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.