On 7/07/2010 1:34 PM, Oli Glaser wrote:
> I'm used to datasheets not giving enough info and getting the odd thing
> wrong, but I was wondering if I'm missing something with this one.
> Basically if you look at the PCB guide at bottom left, I'm wondering how
> they can give exact measurements to the *back* of the panel the XLR 
> socket
> is attached to (I know it doesn't specifically say it it the panel, but I
> have seen other sheets from neutrik where it is labeled)

The 2.7mm part is what sticks through the panel.  The 19mm is from the 
rear of the panel to the rear of the connector.
David...

-- 
___________________________________________
David Duffy        Audio Visual Devices P/L
Unit 8, 10 Hook St, Capalaba 4157 Australia
Ph: +61 7 38235717      Fax: +61 7 38234717
Our Web Site: www.audiovisualdevices.com.au
___________________________________________

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist