On Tue, Jul 06, 2010 at 11:14:18AM -0400, Michael Adelman wrote:
> Hi all,
> 
> I'm new user to this website and PIC Embedded programming.
> 
> Can you post code sample what is the proper configuration of the registers
> so it can work in I2C and how to use these configurations with an
> application. My application need to work as a Slave in this matter.

Might I suggest that you take a look at JAL:

http://www.casadeyork.com/jalv2/

A tutorial example of using i2c with JAL and 16F88s can be found here.

http://www.sirloon.net/loonaweb/sirblog/i2c-com-with-two-16f88-master-slave

The nice thing is that the language/environment handles the low level i2c
issues and setup. You just set the processor, including the library, and
write away.

Hope this helps,

BAJ

> 
> thanks,
> 
> -- 
> Michael Adelman - Intern at ORT Braude Academic College
> Phone: +972-544758146
> 
> Skype: mike214
> LinkedIn: http://www.linkedin.com/in/adelmanmichael
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist

-- 
Byron A. Jeff
Department Chair: IT/CS/CNET
College of Information and Mathematical Sciences
Clayton State University
http://cims.clayton.edu/bjeff
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist