> Oli Glaser wrote:
> > Does anyone know of a decent(reasonably cheap) PCB house in the
UK(or
> > possibly EU) for single >2 layer prototypes
> How much greater? For 4-6 layers i've used newbury in the past without
> any problems, I dunno if they (the fastest they quote for on the pcb
> train website is 3 days for four layer but they may be able to do
faster
> on a custom quotes)

You also need to be a bit fey with them, as the multilayer boards only
get started on certain days, and the 3 days or whatever time they quote
starts from that day. They are quite open about this on their website.
For 2 layer units then they do seem to start a run of these almost every
day.

> >  with <48hr turnaround?
> >
> That is going to be a pretty tall order, If you really need it that
> quick you will probbally have to phone arround the vendors but I'd
> expect to either be dissapointed or at least end up paying a lot of
money.

I would agree here.


> Also with turnarounds this short you have to be carefull about how
> exactly you define turnaround. Afaict most vendors measure it from the
> day after you send them the order to the day they ship it.

I repeat my caveat given above about PCBTrain ... ;)))


-- 
Scanned by iCritical.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist