Hi guys,

I picked up a couple of "slightly used" EL displays the other day, 
apparently out of a Sun server of some description. They're made by 
Planar, have 3 LEDs and a 160x80 graphical EL panel with a touch screen.

Planar part numbers are 996-0277-01 and EL160.80.38, Rev E. Sun P/N is 
370-2311-02 Rev 50. All the juicy details are in the following forum 
thread (most of the good stuff is on page two, the last post includes a 
pinout):
   http://forum.lcdinfo.com/viewtopic.php?t=1051

Problem is, while I have the pinout, the connector is an odd little 
thing that looks like a shrunken version of a Centronics printer connector:
   http://www.skippari.net/lcd/forumstuff/EL160.80.38-SM1_2.jpg

It has 32 pins, is surface-mounted, and is made from white plastic. No 
manufacturer ID or branding that I could see.

Does anyone recognise this connector? While I can desolder it with the 
hot-air gun and replace it with a bit of ribbon cable, I'd rather use 
the "proper" connector if it's something reasonably easy to get...

Thanks,
-- 
Phil.
piclist@philpem.me.uk
http://www.philpem.me.uk/
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist