Wurth Electronics makes press-fit "bushes" for PCBs which sound like
what you are talking about. Also, PennEngineering makes broaching
fasteners for PCBs as well as SMD fasteners.

Sean


On Fri, Jun 11, 2010 at 10:34 AM, Mike Hord <mike.hord@gmail.com> wrote:
> I'm looking for a product (I'm reasonably sure it exists) which can be
> affixed to a PCB
> to provide a conductive threaded anchor and standoff. =A0Soldered down is
> okay,
> swaged may be better. =A0Should be small- 2 to 2.5mm threaded hole with a=
n OD
> as
> small as possible.
>
> Basically, I have a circuit board which will be inside a case and needs to
> be mounted
> to the case with about 2-4mm standoff. =A0Screws can only come from outsi=
de;
> access
> on the inside is good enough to align the board to a hole but not good
> enough to
> allow a PTH/nut solution. =A0Board is not thick enough to thread a PTH,
> either.
>
> Name for this part? Search terms? Companies that deal in such?
>
> Mike H.
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist