I'm looking for a product (I'm reasonably sure it exists) which can be
affixed to a PCB
to provide a conductive threaded anchor and standoff.  Soldered down is
okay,
swaged may be better.  Should be small- 2 to 2.5mm threaded hole with an OD
as
small as possible.

Basically, I have a circuit board which will be inside a case and needs to
be mounted
to the case with about 2-4mm standoff.  Screws can only come from outside;
access
on the inside is good enough to align the board to a hole but not good
enough to
allow a PTH/nut solution.  Board is not thick enough to thread a PTH,
either.

Name for this part? Search terms? Companies that deal in such?

Mike H.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist