> On Thu, Jun 10, 2010 at 3:15 PM,  <jim@jpes.com> wrote:
> =3D> Does anyone have any ideas as to why the error codes no longer show =
in
> > the output window?
> >
> > I noticed that there is no error file in the output any more, but I
> > believe this is turned on, so I can't understand why this is happening.
> > All was well last week when I used it.
> =

> Have you tried a different project? What about starting a new project
> with only the bare minimum of code in there. Come to think of it, even
> a blank .asm should fail due to no "end" directive I think.
> =


Or an old project that is known to work. Then you (might) know if it is the =

code or MPLAB that is the reason for not working.

/Ruben

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D
Ruben J=F6nsson
AB Liros Electronic
Box 9124, 200 39 Malm=F6, Sweden
TEL INT +46 40142078
FAX INT +46 40947388
ruben@pp.sbbs.se
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist