>
> Again, how can everything be working perfectly if you don't have a pickup
> loop?  Why can't you replicate what you already have?  How can you be
> designing this thing and not know the pickup loop requirements, since the
> pickup loop is a integral part of the design.
>
> There's obviously a lot you're not telling us.  You need to give us some
> real information, else this is just a waste of time.
>

Yes I didn't describe because first i wanted to get some response.
I need to design an antenna which should be able to radiate 1KHz to 3MHz.
i will feed the antenna with any of the frequency in this range. Then i will
check the radiated field using another antenna, So that should receive
these. Then My idea is to calculate the lost power to detect metal. I do
interested in building the antenna.
I made my hardware and tested it using demo signals thats why i said my
hardware worked properly.

>
>
> ********************************************************************
> Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
> (978) 742-9014.  Gold level PIC consultants since 2000.
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist