Would you mind telling me the model number of this device? It's just that I've never seen a device like this - most Fluke meters have built-in thermocouple input with cold junction compensation. Sean On Thu, May 13, 2010 at 9:49 AM, Justin Richards wrote: > Hi Sean, > > Yes, the adapter has its own batteries (or battery, It was a year ago so I > cant remember if it was a 9v or a pair of 1.5 volt batteries. =A0I am ten= ding > to think it was the 2 x =A01.5volts). =A0The subject has come up again be= cause > they will be doing their yearly calibration soon. =A0I have been looking = for > it so i can install tamper evident flat batteries to help answer some of = my > questions.. > > It basically plugs into a fluke meter then you plug a thermocouple into i= t. > It does the cold junction compensation and voltage conversion thing I gue= ss > so It needs a power supply. =A0It also has a deg F and Deg C switch > > Justin. > > > > > > On 13 May 2010 19:56, Sean Breheny wrote: > >> Hi Justin, >> >> Does the thermocouple adapter have its own batteries? >> >> Sean >> >> >> On Thu, May 13, 2010 at 1:45 AM, Justin Richards >> wrote: >> > So I should put a tamper sticker over the (flat) batteries so later I = can >> be >> > sure that they used fresh batteries. >> > >> > In this case it is the Thermocouple adapter and not the meter itself. >> > >> > Hmmm, I might just do that. =A0But first I need a flat battery. >> > >> > Cheers Justin >> > >> >> -- >> http://www.piclist.com PIC/SX FAQ & list archive >> View/change your membership options at >> http://mailman.mit.edu/mailman/listinfo/piclist >> > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- = http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist