Adafruit has some clear breadboards...I don't know what they're made of but it may be acrylic which would be a higher temp plastic. Mike H. On Mon, May 3, 2010 at 2:07 PM, Adam Field wrote: > Does anyone have experience with breadboard type prototyping boards at > elevated temperatures? I ran a test with an unknown brand board I had > and it curled up into a U shape, but still works okay electrically. > This was at 85 degrees C, 185 degrees F. > > Unfortunately I haven't been able to find data on temperature limits > from manufacturer. Global Specialties brand available at Mouser is > made from ABS plastic. From limited research, ABS plastic is only good > to 60C. Does anyone know of breadboards that are made from a different > plastic? > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist