its slightly darker , but the characters are supposed to be white on mine.

On Sun, May 2, 2010 at 10:54 PM, Oli Glaser <oli.glaser@talktalk.net> wrote:

>
> ----- Original Message -----
> From: "Jason White" <whitewaterssoftwareinfo@gmail.com>
> To: "Microcontroller discussion list - Public." <piclist@mit.edu>
> Sent: Monday, May 03, 2010 3:40 AM
> Subject: Re: [PIC] Re: LCD Troubles ...
>
>
> > How will lowering the voltage below 5v give me anything more ?
>
> According to Bob, the useful range is very small and close to ground, so I
> assume keeping within that range is probably a good idea - what are you
> seeing - is it all black all the time? If so, that could be all you ever
> see
> unless you drop the voltage, but I'm no expert here. Try looking at it from
> an angle also if it appears to be all black.
>
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>



-- 
Jason White - Python and C++ Programmer
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist