Jon Chandler wrote:
> It has dedicated connectors for ISCP, UART and I2C/SPI, a couple
> analog
> input/gp connectors with power and ground, and a couple PWN/gp
> connectors
> also with power and ground along with a couple switches and 4 LEDs.
> It
> supports many 28 pin 18F series  PICs.  Additionally, all the port
> pins are
> brought out to two rows of headers to add a daughter board for
> applications
> where additional components are needed.

This is roughly the same concept behind my ReadyBoard series, although these
contain more of the power supply and support for peripherals like the UART
right on board.  Probably the most important difference is that the
ReadyBoards all include a breadboard area so that the board becomes the
complete project.  They also come fully assembled.  I thought of kits, but
with modern manufacturing capabilities, a kit would be more expensive than
to have the full board assembled.

There are currently two variants.  The ReadyBoard-01
(http://www.embedinc.com/products/ready01) if for generic 28 pin PICs like
your board.  The ReadyBoard-02 (http://www.embedinc.com/products/ready02) is
for a 28 pin USB PIC, like the 18F2550.


********************************************************************
Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
(978) 742-9014.  Gold level PIC consultants since 2000.
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist