----- Original Message ----- 
  From: Josh Koffman 
  To: Microcontroller discussion list - Public. 
  Sent: Saturday, March 27, 2010 7:27 AM
  Subject: [PIC] UART Framing Error Interrupt


  Hi all. I'm having a bit of trouble verifying if a framing error in
  the UART will cause a receive interrupt. 

  Yes

  I'll likely be using the
  18f2420. The datasheet talks about how to clear a framing error, and
  it talks about how to enable the receive interrupt flag, but it
  doesn't seem to talk about what happens in an error situation.

  I've found a few documents on the web that mention framing errors
  blocking subsequent interrupts (which makes sense since you need to
  clear the interrupt by reading the receive register).

  Can anyone help enlighten me?

  Possibly

  Thanks!

  Josh
  -- 
  A common mistake that people make when trying to design something
  completely foolproof is to underestimate the ingenuity of complete
  fools.
          -Douglas Adams
  -- 
  http://www.piclist.com PIC/SX FAQ & list archive
  View/change your membership options at
  http://mailman.mit.edu/mailman/listinfo/piclist
Tom


  *
  |  __O    Thomas C. Sefranek  tcs@cmcorp.com
  |_-\<,_   Amateur Radio Operator: WA1RHP
  (*)/ (*)  Bicycle mobile on 145.41, 448.625 MHz

ARRL Instructor, Technical Specialist, VE Contact.
http://hamradio.cmcorp.com/inventory/Inventory.html
http://www.harvardrepeater.org
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist