Olin, the device is ready built and is under test now for several months, located some flight hours away, no chance to change pinnings, too late! Peter ----- Original Message ----- From: "Olin Lathrop" To: "Microcontroller discussion list - Public." Sent: Friday, March 19, 2010 2:17 PM Subject: Re: AW: [PIC] Operating PicStart-plus without MPLAB? > Peter Feucht wrote: >> 2. ICSP: good idea, I know that, but the hardware is ready since >> months and no pins left, pity. Nobody was able to foresee so many >> changes, 24 meanwhile...and no end in sight.... > > Surely you can find something to connect PGC and PGD to that wouldn't > interfere with programming? Often a series resistor is all that's needed. > Maybe nothing special is needed depending on what the target circuit looks > like. I discuss some of the issues in > http://www.embedinc.com/picprg/icsp.htm. > > > ******************************************************************** > Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products > (978) 742-9014. Gold level PIC consultants since 2000. > -- > http://www.piclist.com PIC/SX FAQ & list archive > View/change your membership options at > http://mailman.mit.edu/mailman/listinfo/piclist > -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist