> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On
Behalf
> Of Russell McMahon
> Sent: 18 March 2010 12:47
> To: Microcontroller discussion list - Public.
> Subject: Re: PIC resetting frequently
> 
> 
> Trying changing the caps back and putting diodes across the actual
> relay coils (if they are not there already as well as where they are
> shown on the PCB) may be educational.

I looked through the Ops posts but couldn't find if the relays are
actualy mounted on the footprints provided on the PCB, or whether the
10R resistors shown on the PCB overlay have been put in place to drive
the relays off-board?  Based on your comments I presume the latter?

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist