In SX Microcontrollers, SX/B Compiler and SX-Key Tool, mrdieseldude wrote:

I'm using 10 uF caps... is that a problem? I had 1.0 uF caps, but I changed them out only because I've noticed a few commercial designs that I have (one being Parallax's SX Tech board) using the bigger caps (at least on one side of the voltage regulator). I've not tried 0.1 uF caps yet. The code does not seem to be a problem as it works fine on the 9V battery. By the by, what I mean by "won't run" is that the outputs are not doing anything when the SX is attached to the 12V power supply.

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=435144#m435186

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2010 (http://www.dotNetBB.com)