Try the 16F886, the 876 is a bit old and I think more expensive by now.


Regards,

Isaac


Em 8/3/2010 11:32, yorkwils escreveu:
> Thanks Bob. I'm going to have to update to 16f876 now that I realised 16c71
> is OTP.
>
> yorkwils wrote:
>   
>> Perhaps the more experienced can help me please.
>> I am using a Keymaster Software programmer (series VI, revision 3) to
>> program my 16c84. This programmer is not very well known and I can't find
>> much about it on the net. I know these chips are a bit old now but they
>> are working ok and I have a few of them. The programmer will also program
>> 16f84. The programmer has a ZIF socket and a card slot for a satellite
>> card, in fact, I think that is what it was originally used for.
>> Anyway, my 16c84 programming has gone well and I've got a few projects
>> up-and-running. Now I need an analogue to digital sensor for a charging
>> circuit that I'm working on. Once again, I have several older PICs, this
>> time the 16c71 which has four ADC channels. I know it has been superseded
>> by the 16c711 but I would like to use the 16c71 if possible.
>> Now, do I need a different programmer or can I use the Keymaster (which
>> works fine using the win95 software under Wine in Linux)?
>> It looks to me like the two chips are pin-for-pin the same except when the
>> 16c71 is being used for analogue measurements. I'm tempted just to try it
>> and see if it works but caution is probably best as I don't want to
>> destroy anything!
>> Does anyone know the answer please?
>> Thanks, Guy
>>
>>     
>   
>
>
>
> Nenhum virus encontrado nessa mensagem recebida.
> Verificado por AVG - www.avgbrasil.com.br 
> Versao: 9.0.733 / Banco de dados de virus: 271.1.1/2730 - Data de Lancamento: 03/08/10 04:34:00
>
>   

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist