Thanks Bob. I'm going to have to update to 16f876 now that I realised 16c71
is OTP.

yorkwils wrote:
> 
> Perhaps the more experienced can help me please.
> I am using a Keymaster Software programmer (series VI, revision 3) to
> program my 16c84. This programmer is not very well known and I can't find
> much about it on the net. I know these chips are a bit old now but they
> are working ok and I have a few of them. The programmer will also program
> 16f84. The programmer has a ZIF socket and a card slot for a satellite
> card, in fact, I think that is what it was originally used for.
> Anyway, my 16c84 programming has gone well and I've got a few projects
> up-and-running. Now I need an analogue to digital sensor for a charging
> circuit that I'm working on. Once again, I have several older PICs, this
> time the 16c71 which has four ADC channels. I know it has been superseded
> by the 16c711 but I would like to use the 16c71 if possible.
> Now, do I need a different programmer or can I use the Keymaster (which
> works fine using the win95 software under Wine in Linux)?
> It looks to me like the two chips are pin-for-pin the same except when the
> 16c71 is being used for analogue measurements. I'm tempted just to try it
> and see if it works but caution is probably best as I don't want to
> destroy anything!
> Does anyone know the answer please?
> Thanks, Guy
> 

-- 
View this message in context: http://old.nabble.com/16c84-programmer-for-16c71---tp27812676p27819980.html
Sent from the PIC - [PIC] mailing list archive at Nabble.com.

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist