Look here:

http://www.datasheetcatalog.org/datasheets2/35/351802_1.pdf

They have serveral versions with diferent configurations.
Maybe that could be helpful.

Harry

> -----Oorspronkelijk bericht-----
> Van: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] =

> Namens Dario Greggio
> Verzonden: donderdag 18 februari 2010 19:22
> Aan: Microcontroller discussion list - Public.
> Onderwerp: Re: [PIC] ethernet transformer
> =

> Wouter van Ooijen ha scritto:
> >> sorry :) thought I had been clear: TX <-> RX; keep primary and =

> >> secondary at place, and so the polarities.
> > =

> > I guess that might work, but I can imagine a manufacturer using a =

> > physically smaller core for the receiver transformer. I =

> would ask the =

> > manufacturer before doing this in quantities.
> =

> I see, yeah, makes sense indeed...
> I can try asking them: it is a TS6121C, though I am not sure =

> who actually is the manufacturer...
> =

> =

> > To save space: maybe use a jack with built-in transformers?
> =

> More than that, it's a housing/casing issue: we'd need a 90=B0 =

> or rather =

> 180=B0 connector, and no complete magnetics is available like that; so

> we're designing the PCB with either a RJ connector or a molex =

> strip to =

> move some few cm apart to a panel connector.
> =

> thank you Wouter
> =

> =

> =

> -- =

> =

> Ciao, Dario
> --
> Cyberdyne
> -- =

> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
> =



-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist