> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On
Behalf
> Of Richard Pytelewski
> Sent: 10 February 2010 12:06
> To: 'Microcontroller discussion list - Public.'
> Subject: [EE] - mailto:piclist@mit.edu?subject=[EE] Switching 1.5vdc
> On/Off
> 
> Any suggestions for switching  1.5v @ < 1ma?  A fet seem right but
those
> that I've seen are spec'd to 1.8v and no lower.  I have not seen
anything
> else other than a relay (my current back up position).
> 
> 
> 
> All suggestions appreciated!
> 
> 
> 
> Rich

Is this a high side or low side switch?  Any reason you can't use a
bipolar transistor?
 
Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist