I have been asked by an acquaintance if I would be interested in doing 
some PCB board stuffing/soldering on a piecework basis. I said that I 
would be interested and of course the question of costing came up. The 
boards he wants done range in size from approximately 4"X3" up to 6"X8". 
They are all of the ThruHole type. The components will be supplied with 
the boards so all I have to do is stuff them and solder them. A run will 
be all of one size, only two sided and will never be greater than 30 
boards. The component count will be reasonable for the board size. There 
is a possibility that the boards will already contain a few SMT components.

I am at a loss to know how to price a job like this out. I consider 
myself competent to do the work satisfactorily and am confident that I 
can do the work in a timely manner. I would appreciate any comments as 
to how to quote a job like this.

Any enlightenment will be appreciated.

Vic Fraenckel
KC2GUI
windswaytoo ATSIGN gmail DOT com

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist