On Mon, Jan 11, 2010 at 12:52 PM, PICdude wrote: > Quoting Xiaofan Chen : > > >> It is not supported by MPLAB. It is supported by the standalone >> GUI software or the console based pk2cmd. >> >> http://www.microchip.com/stellent/idcplg?IdcService=3DSS_GET_PAGE&nodeId= =3D1406&dDocName=3Den027813 >> > > Okay, I did install that and can program the chip now. =A0Would've been > nice if it worked direclty from MPLAB, but I'm functional for now. > The MPLAB support for PICkit 2 will be of low priority for Microchip. Anyway, Microchip is putting higher priority on the PICkit 3 now that Microchip recommends PICKit 3 over PICkit 2 (they said PICkit 2 is not recommended for new design but since changed the wording). http://www.microchip.com/forums/tm.aspx?m=3D455556 http://www.microchip.com/stellent/idcplg?IdcService=3DSS_GET_PAGE&nodeId=3D= 1406&dDocName=3Den534451 -- = Xiaofan http://mcuee.blogspot.com -- = http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist