Weird, I cut out and pasted in notepad2 then repasted the following
then all was ok.

I noticed after pasting in gmail it has inserted a crlf after ... fit
the section. Section

So I suspect there was a hidden unpaired lf or cr that I pasted in
from the original Build Output Window.

Anyway, its solved if others have issues.

Cheers Justin

#pragma idata App_Conf_Section
//The pragma fixes the following error
//Error - section 'App_Conf_Section' can not fit the section. Section
'App_Conf_Section' length=3D0x00000114
//I can now use all 256 bytes in the config section of EEPROM

#pragma idata Remaining_Sect
//The pragma fixes this error
//Error - section 'App_Conf_

I think there

2009/12/28 Justin Richards <justin.richards@gmail.com>:
> As a check used "//" to commented out the #pragma statements and still
> out of sync.
>
> 2009/12/28 Justin Richards <justin.richards@gmail.com>:
>> Sometimes using the sim in MPLAB the program pointer arrow is out of
>> sync with the code that is about to be executed.
>>
>> Often this is fixed with a "Build All" or a restart of MPLAB.
>>
>> But now it is consistently 2 lines out. =A0ie The Program pointer is
>> pointing 2 lines above the actual code that is executing.
>>
>> I recently added the following so I could increase the size of a
>> structure and as there are two #pragma directives it seemed to be the
>> culprit. =A0The structure is pasted below.
>>
>> Very frusting, anyone experienced this or know a fix.
>>
>> Cheers Justin
>>
>>
>> #pragma idata App_Conf_Section
>> //The pragma fixes the following error
>> //Error - section 'App_Conf_Section' can not fit the section. Section
>> 'App_Conf_Section' length=3D0x00000114
>> //I can now use all 256 bytes in the config section of EEPROM
>>
>> APP_CONFIG AppConfig
>> ;
>> #pragma idata Remaining_Sect
>> //The pragma fixes this error
>> //Error - section 'App_Conf_
>>
>>
>>
>> typedef struct _APP_CONFIG
>> {
>> =A0 =A0IP_ADDR =A0 =A0 MyIPAddr;
>> =A0 =A0MAC_ADDR =A0 =A0MyMACAddr;
>> =A0 =A0IP_ADDR =A0 =A0 MyMask;
>> =A0 =A0IP_ADDR =A0 =A0 MyGateway;
>> =A0 =A0IP_ADDR =A0 =A0 PrimaryDNSServer;
>> =A0 =A0struct
>> =A0 =A0{
>> =A0 =A0 =A0 =A0unsigned char bIsDHCPEnabled : 1;
>> =A0 =A0 =A0 =A0unsigned char bInConfigMode : 1;
>> =A0 =A0} Flags;
>> =A0 =A0IP_ADDR =A0 =A0 SNTPServerAddr;
>> =A0 =A0WORD =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0HTTP_PORT;
>> =A0 =A0WORD_VAL =A0 =A0SerialNumber;
>> =A0 =A0IP_ADDR =A0 =A0 SMTPServerAddr; =A0 =A0 // Not used.
>> =A0 =A0IP_ADDR =A0 =A0 TFTPServerAddr; =A0 =A0 // Not used.
>> =A0 =A0BYTE =A0 =A0 =A0 =A0NetBIOSName[16];
>> =A0 =A0 =A0 =A0cj =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0CronJob[8];
>> =A0 =A0 =A0 =A0BYTE =A0 =A0 =A0 =A0 =A0 =A0tz_offset;
>> =A0 =A0 =A0 =A0BYTE =A0 =A0 =A0 =A0 =A0 =A0tz_text[4];
>> =A0 =A0 =A0 =A0BYTE =A0 =A0 =A0 =A0 =A0 =A0LCDMsg[2][16];
>> =A0 =A0 =A0 =A0BYTE =A0 =A0 =A0 =A0 =A0 =A0BeatServerURL[25]; //www.pick=
ledeye.com
>> =A0 =A0 =A0 =A0WORD =A0 =A0 =A0 =A0 =A0 =A0HeartBeatDelay;
>> } APP_CONFIG;
>>
>

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist