I have a triac ( HTA06-600 ) from All-Electronics and I do not have  
the pinout.
Is there anyway to determine which pin is the gate ; anode 1 and anode  
2 ?
I have a DMM , oscope and a triangle waveform generator.    [ and  
other "stuff" ]
Is the center pin likely to be the gate ?   With enough drive current  
and voltage delivered to the gate , does it matter which is anode 1  
and which is anode2 ?
Gus
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist