> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On
Behalf
> Of Jinx
> Sent: 24 November 2009 09:13
> To: Microcontroller discussion list - Public.
> Subject: [EE] DC multiplier/amplifier
> 
> I've got a friend (yes, really) who has an old vehicle dynamometer. At
> the moment he uses a DC tacho generator attached to the floor roller
> which puts out 8V per 1000rpm into the dynamometer, up to a limit
> of 6000rpm. Doing it this way means the feedback is speed
> 
> He's wanting to use a dashboard tacho, to use rpm feedback, an
> example of which he has and thinks puts out 1V per 1000rpm. The
> active component is an SAK215
> 
> http://www.datasheetcatalog.com/datasheets_pdf/S/A/K/2/SAK215.shtml
> 
> The meter in this dash tacho is presumably a 10mA movement
> 
> What he's asked me to do is amplify the 0 - 6V (ie 0 - 6000rpm) range
> of the dash tacho to 0 - 48V to feed to the dynamometer
> 
> One thought I have is to boost the 12V car supply to 48V with an SMPS,
> and use a PIC to measure the voltage from the tacho and chop/integrate
> the 48V to 8x that voltage
> 
> I think opamps are out because of the 48V, but would consider any
> other linear suggestions anyone has, perhaps a modified audio amp
> for example
> 

Joe,

Do you know how much current you need to source on the 48v signal, i.e.
the load impedance of the dyno?  Do you already have a supply voltage
available for your interface?

Regards

Mike

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist