In SX Microcontrollers, SX/B Compiler and SX-Key Tool, robotworkshop wrote:

I finally had a chance to generate PDF versions of the documentation for this PCB board.  It will help for anyone that is considering building either the full kit or just how to use the board if you already have an SX48 chip and need a carrier.  The instructions explain how you can use an ordinary soldering iron to assemble it.

[url=http://www.robotworkshop.com/robotworkshop/projects/parallax/sx48oem.pdf]This link is for the assembly manual for the board[/url]

[url=http://www.robotworkshop.com/robotworkshop/projects/parallax/SX48OEMSchematic.pdf]This link is for the schematic of the board[/url]

If you have any questions or need any of these boards just let me know.

Robert

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=194701#m403104

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2009 (http://www.dotNetBB.com)