alan smith wrote:
> Strange issue came up from another project a friend is working on.
> Building and flashing within the C18 compiler, its just fine.  Now if I
> take the .hex to another PC and try and flash it says its doing it,
> verifies...but the target does not run.  To validate the setup, I can
> flash other targets built in assembly with that other PC and ICD3 by
> importing the hex file.  It appears ONLY when built with the C18, it
> won't flash correctly.  I am using MPLAB 8.3, ICD3 and current version of
> the C18 release.

It sounds like the hex file hasn't captured the complete configuration of
the chip.

-- Dave
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist