I have lost the original connection diagram for my Kenmore dryer.   
( Don't ask )
The motor has 3 leads.  ( orange, yellow and black )
If I connect  one side of 120VAC to the orange lead and the other side  
of 120VAC to both the yellow and black leads , the motor starts running.
According to a diagram I have for another Kenmore , either the yellow  
or black lead is disconnected by a switch which is activated by  
rotational inertia ( RI ) from the spinning motor.
Since this RI switch has been worn out, I was going to switch off the  
appropriate lead once once a hall effect device detected shaft  
rotation for 1 second.
What I don't know is how to determine which lead I should switch off.

Black/orange shows 2.7 ohms
Yellow/orange shows 2 ohms

Best
Gus
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist