In SX Microcontrollers, SX/B Compiler and SX-Key Tool, Zoot wrote:

If you are doing a product with a Stamp why don't you use an OEM design -- the Stamp firmware pre-burned runs about $11 and then you'd need minimal external components (in a finished board), *especially* if you preburn EEPROMs with your Stamp program and don't need the PCZ-to-Stamp serial circuitry.

See this thread for several version of a "minimum" Stamp: [url]http://forums.parallax.com/forums/default.aspx?f=21&m=106379[/url]

And this page for OEM Stamp interpreters: [url]http://www.parallax.com/Store/Microcontrollers/BASICStampOEM/tabid/135/List/0/CategoryID/10/Level/a/SortField/0/Default.aspx[/url]

Depending on volume, it would seem you could have a Stamp 2 on each board for around $13.00 (esp. if you order EEPROMs in bulk from a regular wholesaler).

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=3&m=373927#m388793

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2009 (http://www.dotNetBB.com)