Like I mentioned this is not used in production. We use it only during
development to reboot the PIC. And Microchip told us to use exit(0) to
reboot the PIC through software.

I'm only asking about this because I'm curious why it happens, since
every time it happens we have to physically power cycle the PIC. And
this is undesirable because some of the other components take long to
boot.

Quintin Beukes

On Fri, Sep 25, 2009 at 2:14 PM, Olin Lathrop <olin_piclist@embedinc.com> w=
rote:
> Quintin Beukes wrote:
>> I have noticed that when I execute exit(0) too many times,
>
> What exactly do you think EXIT is going to do for you in a dedicated
> embedded system like a PIC? =A0*Think* about it.
>
>
> ********************************************************************
> Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
> (978) 742-9014. =A0Gold level PIC consultants since 2000.
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>

-- =

http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist