>
> The only downsides are: 3.3V only (but with many pins allowing 5V inputs),
> seems overly sensitive to ESD.
>

Is this a general thing with these low voltage PICs? Because we're
using the LF PICs now and noticed it being more sensitive to static
than the previous. In fact, with the previous 4.2V PICs we never
noticed any problems when merely walking closer to it, even on the
same circuit layout. With these you can just touch the insulation on
the wire running from the power supply, rub your foot against the
floor ONCE and it would reboot (before we fixed the problem). Though
the 4.2V wasn't this sensitive. (We switched because the previous
engineer was running the 4.2V pic at 3.3V - and a switch was easier
than redesigning and remanufacturing all the boards).

Q
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist