In SX Microcontrollers, SX/B Compiler and SX-Key Tool, robotworkshop wrote:

Hello,

The datasheet for the SX28 and SX48 protoboards have a nice image of the populated boards but I wanted to see if it is possible to get a graphic image of the top and bottom of each one of the boards that shows the layout of the traces as viewed from each side.  The reason I am interested in them is that I am trying to wrap up an article which uses the SX28 and SX48 protoboards.  Since it requires a couple modifications to the board it would be much easier if I could use an image of the unpopulated board and use it to mark what traces need to be cut and altered for the project.  There would be 4 images.  The top and bottom layer of each bare board.

Is this something Parallax has available and if so how can we get the images?

Best Regards,

Robert

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=387278

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2009 (http://www.dotNetBB.com)