In SX Microcontrollers, SX/B Compiler and SX-Key Tool, robotworkshop wrote:

The easiest way to start is to also pickup one of the SX28 or SX48 protoboards since they already have the programming header installed.  You can still work with just the SX28 on a breadboard.  You'll just need to wire up a 4-pin header for programming.  A good reference is the schematic that Parallax has on the SX28 protoboard page and also the datasheet they have posted for the SX28 itself.  One thing to bear in mind is that the pinout for the Surface mount and DIP versions of teh SX28 are slightly different so double check your wiring!

Beyond that just install the SX development software and try some of the examples in the SX/B help file.  It will help jump start your projects.

Robert

---------- End of Message ----------


You can view the post on-line at:
http://forums.parallax.com/forums/default.aspx?f=7&p=1&m=382035#m382039

Need assistance? Send an email to the Forum Administrator at forumadmin@parallax.com

The Parallax Forums are powered by dotNetBB Forums, copyright 2002-2009 (http://www.dotNetBB.com)