Thanks Carl,

I will give freepcb a shot, and then try that method for a prototype  ...  I 
was just going to 'rats-nest' it, but I might as well try something new.

Regards,   Roger


----- Original Message ----- 
From: "Carl Denk" <cdenk@windstream.net>
To: "Microcontroller discussion list - Public." <piclist@mit.edu>
Sent: Saturday, August 29, 2009 1:03 AM
Subject: Re: [EE] PCB Manufacturer in Australia


> Check out, all Freeware::
> http://www.freepcb.com/
>
> Though check the hole sizes on stored components.
>
> and then to print the Gerber files, and this output can be to scale,
> printed in various formats. I have used this to print with laser
> printer, clothes iron to copper clad board, and etched. Probably your
> local printer could use this output
>
> http://www.pentalogix.com/Products/ViewMate/register.cfm
>
> All this stuff fairly user friendly :)
>> I dont have a PCB Cad program on this computer so will have to invest in
>> one.
>>
> -- 
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.71/2330 - Release Date: 08/27/09 
18:02:00

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist