Roger,

Silicon Chip magazine normally has a couple of ads for PCB manufacturers.
Unfortunately I don't have a copy of the magazine with me at work - if you
are interested I can hunt down the magazine at home tonight. If I recall
some of the overseas companies that take orders from Australia advertise as
well. Can't comment on them (haven't used them).

R/-

Grant

On Fri, Aug 28, 2009 at 9:05 AM, Roger Weichert <rweicher@bigpond.net.au>wrote:

> Hi Guys,
>
> Just wondering if anyone can point me to a company in Australia that can
> produce a handful of pcbs, approx 25 x 30mm. Maybe 10 or 20 to start with.
>
> Probably only needs to be single sided, as will have a handful of smd parts
> ...  but will also need to have holes drilled for a 16 pin DIL socket
> (though I could drill them myself if needed .. with such a small number).
>
> For anyone with experience with the Aus market ..  what sort of price range
> would you expect to pay   ...  and what sort of time frames should I expect
> ...  from initial contact to board in hand?
>
> I have no recent experience in designing  pcb's, so what format is likely
> to
> be required?
>
> Thanks.
>
> Regards,  Roger
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist