We use BEC a fair bit with good results. If you're in no hurry, you can share some space on our next prototype panel going in. David... Roger Weichert wrote: > Hi Guys, > > Just wondering if anyone can point me to a company in Australia that can > produce a handful of pcbs, approx 25 x 30mm. Maybe 10 or 20 to start with. > > Probably only needs to be single sided, as will have a handful of smd parts > ... but will also need to have holes drilled for a 16 pin DIL socket > (though I could drill them myself if needed .. with such a small number). > > For anyone with experience with the Aus market .. what sort of price range > would you expect to pay ... and what sort of time frames should I expect > ... from initial contact to board in hand? > > I have no recent experience in designing pcb's, so what format is likely to > be required? > > Thanks. > > Regards, Roger > > -- ___________________________________________ David Duffy Audio Visual Devices P/L Unit 8, 10 Hook St, Capalaba 4157 Australia Ph: +61 7 38235717 Fax: +61 7 38234717 Our Web Site: www.audiovisualdevices.com.au ___________________________________________ -- http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist