> -----Original Message-----
> From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On
Behalf
> Of PicDude
> Sent: 18 August 2009 06:20
> To: piclist@mit.edu
> Subject: [PIC] Better way to read a serial data stream?
> 
> 
> Hi all,
> 
> I intend to read a proprietary serial data stream from another product
> into
> a spare PortA pin on a 16F pic.  Currently 8Mhz internal osc, but the
PCB
> is
> setup for a 3-pin resonator (20Mhz or other) resonator if necessary.
> 
> Essentially there is a relatively long idle period, followed by over
70
> sequential data bits which are around 400ms long each, and at approx
1%
> timing error from the sender.  This becomes fun because I don't have
> interrupt-on-change on this pin, 

Which pin are you using and which device?

=======================================================================
This e-mail is intended for the person it is addressed to only. The
information contained in it may be confidential and/or protected by
law. If you are not the intended recipient of this message, you must
not make any use of this information, or copy or show it to any
person. Please contact us immediately to tell us that you have
received this e-mail, and return the original to us. Any use,
forwarding, printing or copying of this message is strictly prohibited.
No part of this message can be considered a request for goods or
services.
=======================================================================

-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist