> Thanks Harold :) :)  Copy/pasted and it worked fine.
>
> Eventually was going to get to segregating out the individual bits with
> AND/OR sort of action. At this point just am happy the hardware is
> working OK. Don't know why what I had doesn't work though, all the PORTB
> pins are pulled high, which I verified both with a DMM and logic probe.
> Guess, I'll have to dig into the ASM. Sure would seem that the port
> reports what it is in reading and the boolean would happen. Oh, I added
> two "0" to make the binary 8 bits. Thanks again. :)


If you have RB6 and RB7 set as debug pins, there's no telling what state
they'll be in.

Good luck!

Harold


-- 
FCC Rules Updated Daily at http://www.hallikainen.com - Advertising
opportunities available!
-- 
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist